QUESTIONS & ANSWERS FAQ
FAQ
Towing, insulation, power and ordering — the questions people ask us most are all here.
01Which bikes are good for towing?
Non-motorized vehicles such as pedal-assist bikes and e-bikes are generally a good fit. For motorcycles, it depends on whether local rules allow it. The final call depends on the towing bike's frame, brakes, weight, actual power and local regulations.
02How does a non-motorized camper trailer compare with other ways to travel?
Getting around: A bicycle runs on your own muscle; motorcycles, cars and motorhomes depend on fuel or charging stations. A non-motorized camper trailer paired with a power-assisted towing bike makes a travel setup topped up by solar power. Travel and living costs are low, and you depend much less on outside energy and on roads being intact. It can get through places cars can't, reach spots cars can't reach, and if the road is cut off, two people can even carry it across.
Sleeping: On a bicycle or motorcycle trip you usually have only two choices: a tent or a hotel. Tents are a hassle to pitch and pack. In the morning they're covered in dew inside and out, so you can't pack up right away — you have to spread the tent out to dry for hours. If it doesn't dry, the tent is full of moisture that night, rain makes it even more miserable, and a tent has almost no insulation. With hotels, you start worrying about finding a place from four or five in the afternoon, and if it's bad you have to keep looking. Hotels are mostly in busy town centers, so it's hard to really stay out in nature.
A regular car converted for sleeping is, without the air conditioner on, even less comfortable than a tent, because the car body has no complete insulation layer — and running the air conditioner uses a huge amount of energy. A Class C motorhome is comfortable to live in and can park out in the wild or stop for a rest anytime, but buying it, fueling it and running it are all expensive.
A non-motorized camper trailer has a fixed bed, a zero-thermal-bridge insulated body, storage space and a solar system. No tent to pitch, no hotel to find, and no fuel needed to keep traveling and living. It's not as roomy as a motorhome, but it gives you a steady, comfortable place to live long-term at much lower cost and energy use.
03Is any box good enough to live in?
No. Keeping out wind and rain only makes it a box. A cabin that's truly fit to live in also has to deal with insulation, thermal bridges, condensation and weight. Many makers just build a shell that a person can lie down in. In real use these are cold in winter, hot in summer and dripping with condensation everywhere — they are products that rip people off.
REOARK camper trailers use a zero-thermal-bridge body. It insulates far better than a motorhome, and even far better than a house. For the same insulation and the same interior size, my cabin is the lightest in the world. This isn't an ordinary box shrunk down — it's a lightweight cabin redesigned from scratch to be truly livable.
Watch out: Some makers build small non-motorized cabins from cheap panels with no insulation at all. These are simply not fit to live in — they're basically a metal or plastic shell on wheels with no real thermal insulation, and in practice they're worse than a tent. A tent is full of condensation inside in the morning, but at least its walls slope, so the water runs off the sides. The roof of a camper trailer is flat, so once uninsulated panels start to condense, the water has nowhere to go. It drips on your head inside the cabin and soaks your quilt, clothes and everything you brought, leaving them wet and cold. On hot days it becomes an oven and quickly turns into a steamer. Building these means caring only about your own profit, with no thought for how it hurts the people using it — making junk from cheap panels and luring people with a low price, taking money from those who can least afford it.
04Why do we say car-to-bed conversions, rooftop tents and pop-top campers (soft or hard top) are a very bad deal?
Because their physical structure has fatal flaws that can't be overcome: very thin insulation, very poor sealing, and large thermal bridges (cold bridges) everywhere that can't be sealed off.
Whether it's a soft or hard pop-top, the folding hardware, lifting mechanism and frame are all metal thermal bridges that conduct heat directly. On top of that, a regular small vehicle has door gaps, windows, and a cab (dashboard and footwell) that simply can't be insulated or sealed, and the tiny gaps behind the interior trim only leave room for very thin insulation. Overall, the insulation is close to zero.
In cold weather: Below 10°C, warm moist air hitting cold fabric, metal frames or the thermal bridges at the front of the vehicle will condense heavily, so water drips inside and mattresses go moldy. Close the windows and it "rains" inside; open them and it's an ice cave. Compared with a 30 mm foam-core insulated body, this kind of uninsulated structure is dozens of times worse at keeping heat in or out. Even with a diesel parking heater or an electric car's air conditioner, the equipment has to run at high power the whole time.
In hot weather: Above 28°C, the thin insulation and pop-top mechanism can't block the sun's heat, and once the engine is off it quickly turns into a steamer. Cold air from a parking air conditioner leaks out through the gaps in the mechanism and the front of the vehicle. Power use multiplies, and forced cooling also sends relative humidity through the roof, leaving it feeling "cold and sticky" and stuffy at the same time.
Bottom line: Any product that relies on a pop-top mechanism, soft fabric, or a small-vehicle body full of thermal bridges and thin insulation — without a complete, separate, thick-walled insulated body — is basically paying to suffer in hot and cold weather: high energy use, poor experience.
05Why can our frameless non-motorized camper trailers beat ordinary motorhomes, traditional trailers and even regular homes for comfort and long-term cost?
The key is that we use a true "metal-frame-free, fully sandwich-insulated body," which cuts off heat flow through thermal bridges at the source. Combined with the thermal advantage of a small space and our own efficient ventilation system, it delivers top-level living comfort and very strong long-term savings.
Structure: The walls are 3 cm thick and the floor is 5 cm thick, built as one composite of "fiberglass outer shell + foam core + interior finish panel." The whole body uses no metal frame at all, giving true zero-thermal-bridge insulation. Most conventional trailers on the market still use metal frames. Class C motorhomes in the 300,000-yuan range also have serious heat-loss problems: cold coming in through the cab, a thin chassis floor, thermal bridges in the body frame, and air circulating through the over-cab section. A wood floor laid over the steel chassis plate alone loses heat more than 22 times faster than our 5 cm foam floor. Ordinary homes lose heat easily because of their large spaces, heat-conducting concrete walls, and thermal bridges around doors and windows.
Real-world test: With 3–4°C outside and the windows on both sides each one-third open for ventilation, the body heat of a single child alone kept the inside steadily rising to 20°C. For comparison, a 12 m² bedroom in an ordinary home, with the windows closed and an adult sleeping inside, only stayed at 8–9°C. Our own ventilation duct design works much better than the roof vent fans on traditional motorhomes: it brings in fresh air without wasting the heat inside. This means that even at -10°C outside, the inside can stay around 10°C. In most normal weather between -10°C and 30°C, you don't need to turn on any heating or cooling at all.
Long-term cost: An ordinary home needs high-power air conditioning or heating running constantly to keep a large space comfortable. Traditional motorhomes and trailers with metal frames have poor insulation, so they also have to run heating and cooling at high power. Our metal-frame-free, fully sandwich-insulated camper trailer insulates extremely well: most of the time heating and cooling use zero energy, and even in extreme cold it needs only very low power. Add no property fees, no car maintenance and no car insurance, and the overall long-term savings are overwhelming.
06How should I read the "power-to-weight ratio" of a towing setup? Why must you never ask a small horse to pull a big cart?
Whether a setup tows smoothly comes down to the overall power-to-weight ratio: the towing bike's power divided by the total weight of bike plus trailer.
A non-motorized towing setup isn't made for heavy loads, so you can't have it both ways. Choosing a non-motorized vehicle while expecting to carry as much as a motorhome is the wrong fit from the start. Real travel means choosing what to bring based on how you travel. Some people want to bring even more than motorhome owners do, which usually comes from imagination rather than actual travel experience. If you really need to carry heavy loads, don't choose a non-motorized vehicle.
Use the Towing Calculator to check whether your current weight and power combination makes sense.
07When power isn't enough, why do we strongly advise against "adding power to the trailer"?
The iron rule of towing is: the towing bike has full control, and the trailer must purely follow.
If you add assist power to the trailer, such as a hub motor, then whenever the bike and trailer power get even slightly out of sync, the trailer's push acts directly on the hitch. In corners or when braking, it "pushes" the towing bike along, which can easily make the bike skid, jackknife out of control, or even tip over. On top of that, adding a motor and battery to the trailer greatly increases its empty weight, making the setup heavy at the back and light at the front. The whole setup's stability on the move drops sharply, and the slightest sway in the trailer will strongly throw the towing bike around. It is extremely unsafe.
When power isn't enough, increase the towing bike's power or reduce the total weight — don't add power to the trailer. Use the Towing Calculator to check whether your current weight and power combination makes sense.
08I'm outside China. How much are shipping and import duties?
Our prices are factory prices at our workshop in Huizhou, China. Shipping and import duties are not included.
Shipping: we arrange shipping to your country and quote it for your address before you order. You can also pick it up in person.
Import duties and taxes: paid by the buyer directly to customs in your country when the trailer arrives. They are not paid to us and are not part of our price. For the US, expect roughly 25% or more of the trailer price; rates change often, so the exact amount is set at customs clearance. A local customs broker can check the current rate for you.
Tell us your country and city and we'll send you a shipping quote. Contact us